G9 KPR R30T MRS Grey.

[streetrace]

Takie coś znalazłem:

Instruments module 17

Light/rain sensor
This is a sub-module of body control and you can adjust the sensitivity for auto-lights and the rain sensitivity for the auto wipers – I found the wipers weren’t sensitive enough
Byte 0,
Bit 0 to auto turn lights on above 90mph (not sure if this only work with auto lights)
Bits 3 and 4 select a more sensitive auto light on threshold – ie lights can come on when it less dark
Byte 2 rain sensor correction – default setting for tt, but I swapped to 23, 35% a8 (4h) which seemed to give a better range of sweep speeds than the tt one.

W vcds wchodzisz w 17 - instruments... potem - long coding helper i
Masz poziomo kwadraty z Byte'mi, a w każdym z nich masz liste bit'ów. VCDS powinien Ci pomóc i podpowiedzieć jak kodować

Oprócz tego masz jeszcze takie ustawienia:
Wchodzisz w 09 central electrics

Byte 18 drl settings
Default for uk ttrs is 58, which is front leds only , rear lights off. Vcds has various settings in a pulldown box, but if you want the rear lights to be on as well as the leds for drl ( I have this setting) then you manually type in 59 in the byte table, or use 01011001 in the binary field.


Byte 24 drl brightness
Bits 0-6, you put in the decimal % brightness 1 to 100
Bit 7 must be enabled or the drl leds will not light up (? Why this exists I don’t know)


Firstly this DOES WORK in terms of changing the brightness – other posters have said this doesn’t work but it certainly does on my car
Secondly I can see big steps in the brightness every 10%, but cant see any change between the default 92% and 99% or 100% - seems to max out about the 92% default


Thirdly, even low settings like 20% work properly and don’t throw any error codes or dis messages, contrary to some posts I have read.

Byte 26 but 3 drl only acive with adl disabled will set the drl on when the light switch is off, and they dim when you set the lights to sidelights or headlamps on enabled sets the drl to be on only with the auto lights switch set to auto – when the switch is off, all lights including drl will be off, on auto the drl will be on bright, and on side or main lights the drl leds will be dimmed

- - - - - - - - DODANO - - - - - - - - -

Czujnik na lusterku? Wydaje mi sie ze w ttmk2 mialem czujnik na podszybiu od swiatel dzienne/mijania.

Obadajcie sobie chłopaki część 8J0857511G to jest lusterko wewnetrzne do 8j z kamerą do high beam assist
Czujnik zmierzchowy jest na podszybiu, ale nie czujnik anty oślepieniowy pojazdów z przeciwka do HBA